Chadburns Mollart - Power Transmission for Land, Sea & Air

land products UNIVERSAL JOINTS - SINGLE - HIGH TORQUE


Chadburns MollartMOLLART SINGLE ‘HOOKES’ TYPE UNIVERSAL JOINT

The “ME” "MA" & "ME-HT" universal joints is one of the most popular joints in the Chadburns-Mollart PT range of commercial products. Offered in 11 standard sizes and manufactured to precise dimensions in high quality materials, the ME universal joint is capable of transmitting high torques at speeds of up to 1800rev/min, with working angles for powered operation up to 25 °, the joints can be used where axial tension or compression occurs.

These joints can be supplied with a verity of bore configurations to suit the customer’s requirements.

The joints are riveted in assembly and pre greased, if the joints are not to be lubricated when running, grease retaining covers are recommended.
These joints are manufactured in steel as standard but can be offered in alternative materials such Stainless Steel or Phosphor Bronze.

STANDAGE SINGLE ‘HOOKES’ TYPE UNIVERSAL JOINT

The LF259 universal joint is manufactured to in Steel or Stainless Steel in a range of 12 sizes and are capable of transmitting high torques at speeds of up to 1200rev/min, with working angles for powered operation up to 25 °, end loads should be avoided.

These joints can be supplied with a verity of bore configurations to suit the customer’s requirements.

The joints are riveted in assembly and pre greased, if the joints are not to be lubricated when running, grease retaining covers are recommended.

ROBINSON SINGLE ‘HOOKES’ TYPR UNIVERSAL JOINT

The LF264 universal joint is a robust product manufactured with 40ton weldable steel forks and high tensile heat treated pins and centres, for transmitting high torques at speeds of up to 1000rev/min with working angles for powered operation up to 25 °, the joints also have shock load capabilities but end loads should be avoided.

These joints can be supplied with a verity of bore configurations to suit the customer’s requirements.
The joints are fitted with a grease nipple for lubrication, but if the joints are in continuous use they should be fitted with a grease retaining cover or alternatively have continuous oil lubrication.

These joints are manufactured in 3 sizes only.